Concrete Chemicals

Cembond CGA 01 | Cembond Addiva(P) | Horeb NB-100 | Horeb NB-PQC | Horeb PB-201 | Horeb PB-202 | Horeb PB-203 | Horeb PB-204 | Horeb Module Release No-1 | Horeb Pump Plus | Horeb Grout US | Horeb Grout NS

Concrete chemicals and performance enhancers help civil industry master their domain challenges. Our performance enhancers go one step further, improving properties such as early & late Strength, setting time and workability. In addition to our standard products, we offer customized Solution for a wide variety of composite cements.

Sulphonated naphthalene formaldehyde based. It is slump retainer as well as water reducer, plasticizer and water proofing add mixture. It is suitable for all climates and specially suitable for concreting.

HOREB NB – 100 is recommended for use in slender components, floor slabs and foundation with pact beams, columns, shot concrete and reinforcement.

Reduces permeability | The setting is extended | Reduction of water up to 20% and the water reduction percentage is high, it can be achieved depending on mixed design | Ultimate strength is increased significantly | It improves very high workability to concrete mixtures without any addition of extra water | It also retains high workability with time without any excessive retardation of set | There is no shrinkage effect.

New generation super plasticizer for concrete based on polycarboxylic ether polymer with long lateral chains.

HOREB NB-PQC gets the cement to be dispersed to a greater extent and combine the properties to produce self compacting non-shrinkable concrete with workability retention and high range water reduction. It is helpful for reduction of high performance concrete with high workability.

HOREB NB – PQC is a high performance super plasticizer which is suitable for concrete where high early and ultimate strength. It has been developed for use in ​Pre-cast concrete | High strength and high performance | Pumped concrete | Self compacting concrete | Concrete requiring long retention and workability | Concrete with excellent flow ability with optimal cohesion and high water reduction.

A 3rd generation polycarboxylic ether based super plasticizer. Its high range water reducing come water proofing and slump retaining properties makes it specially suitable for concreting in all climate conditions.

HOREB PB-201 is recommended for use in floor slabs, piling, precast concrete, foundation and slender component with packed reinforcement beams, ceiling, columns and cast-in-situ works.

It produces flowable concrete | It reduces permeability | It also extends initial setting time without affecting the final setting time | It reduces water up to 30% | Higher percentage of water reduction can be achieved depending on mix design | It improves the retention of high workability with time without excessive retardation of set | It improves very high workability to concrete using crusher sand | No shrinkage Effect | Significant increase in ultimate strength | It improves very high workability to concrete mixes without adding extra water | It is applicable in severe atmospheric and Saline condition.

A polycarboxylic ether based admixtures conforming to IS 9103:1999.

HOREB PB-202 is used in concrete of all types especially for concrete with high workability , long term strength and high early requirements with zero segregation and low water cement ratio.

In order to achieve high early strength | It reduces the curing time, resulting to increased production of concrete | It improves workability of concrete mixes with low ratio | It is specially beneficial for quality precast concrete element | There is significant increase in ultimate strength | Impervious concrete with less shrinkage resulting to early and ultimate flexural and compressive strength is achieved in comparison to common traditional super plasticizer.

A super plasticizer for concrete based on polycarboxylic ether polymer with Long lateral chains. It gets the cement to be dispersed to a greater extent and combines the properties to produce self compacting, non shrinkable concrete with high range water reduction and workability retention. It is also helpful for the production of high performance concrete with high workability.

HOREB PB-203 is a high performance super plasticizer which is suitable for concrete where high Early and ultimate strengths are required. It has been developed for use in Pumped concrete | Precast concrete | It is a high strength and high performance concrete | It is self compacting concrete | Concrete requiring long workability and retention | Concrete with extreme water reduction with excellent flowability with optimal cohesion.

A super plasticizer for concrete based on polycarboxylic ether polymer with long lateral chains. It gets the cement to be dispersed to a greater extent and combines the properties to produce self compacting, non shrinkable concrete with high range water reduction and workability retention. It is also helpful for the production of high performance concrete with high workability.

HOREB PB – 204 is a high performance super plasticizer which is suitable for concrete where high early and ultimate strengths are required. It has been developed for use in Pumped concrete | Precast concrete | It is a high strength and high performance concrete | It is self compacting concrete | Concrete requiring long workability and retention | Concrete with extreme water reduction with excellent flowability with optimal cohesion.

A low viscous mineral oil based shutter release agent. It is a ready for direct application and use.

HOREB Mould Release No -1
can be used (1) To obtain clean and smooth concrete surface (2) To protect steel and wooden form work (3) To provide quick, clean and easy stripping of moulds or form work.

Extended life of form work | Higher coverage | Non corrosive to steel | Improved finish, stain and air free fair faced concrete | Dust free concrete surface | Minimum cleaning of shutter before use | Can be used on all type of form work.

HOREB PUMP PLUS is easily soluble in water and enhances the efficiency of the concrete pump and pipeline as it causes lubrication in the pipeline causing easy passage of harsh concrete mixes without any hindrance, supporting non choking of pipeline in continuous concreting process and the hydraulic pressure in the pump also gets minimised.

HOREB PUMP PLUS is used as a pumping aid for concrete pump and as a most effective priming compound When concrete is pumped through long distance pipelines from the batching plant to the pouring plant it comes to effect in the best Way. The friction when the concrete passes through the long pipelines is reduced and the lubricating effect makes the easy passage for the concrete preventing any choking of the pump and pipeline. Where there is high volume of concreting involved, like in construction of Dams, Tunnel, Shafts, Well-foundation, Decks, Bridge
Piles, etc., choking problems of concrete pumps is eased by the use of this unique compound.

HOREB Grout US (Ultimate Strength) is a free flowing, non-shrink, ultra high strength and chloride free grout, conforming to BS-1181, Part 116-1983

HOREB GROUT US must be placed in areas free from grass, oil, dust and loose concrete. Grouting areas to be saturated with water and it should be ensured that no stagnant water is there before application. Then add HOREB GROUT US powder as per recommended dosages to clear water and keep on mixing with a grout on concrete mixture till smoothness and even consistency is achieved. Mixed grout should be used within 15 minutes of preparation. After initial hardening of grout, it should be kept damp or with water-ponding or by wet harrier cloth minimum of seven days. Water and powder ratio varies from 0.12 to 0.13 depending on the consistency required of the site. In 25 g of the material will yield approximately 12.0 litres of fluid grout and 11.0 litres of plastic grout mix respectively. Temperature may have to be assured before Pouring the grout at site.

HOREB Grout NS (Normal Strength) is a free flowing, non-shrink, high strength and chloride free grout. It is used for grouting under the base plates and bolt pockets grouting of all columns, equipment in precast constructions concrete, beams, girds, repair and rehabilitation of structure.

HOREB GROUT NS must be placed in areas free from grass, oil, dust and loose concrete. Grouting areas to be saturated with water and it should be ensured that no stagnant water is there before application. Then add
HOREB GROUT NS powder as per recommended dosages to clear water and keep on mixing with a grout on concrete mixture till smoothness and even consistency Is achieved. Mixed grout should be used within 15 minutes of preparation. After initial hardening of grout, it should be kept damp or with water-ponding or by wet harrier cloth minimum of seven days. Water and powder ratio varies from 0.12 to 0.18 depending on the consistency required of the site. In 25 kg of the material will yield approximately 13.0 litres of fluid grout and 12.0 litres of
plastic grout mix respectively. Temperature may have to be assured before pouring the grout at site.